Polyurethane-Hypalon™ UY 12 mil Glove

CHARACTERISTICS

The glove is manufactured using a solvent based polyurethane layer with a solvent based hypalon™ layer.

This glove is designed as a direct replacement for 15 to 25 mil Hypalon™ gloves. The 12 mil glove with polyurethane on the inside and Hypalon™ on the outside has equivalent chemical and mechanical properties. The 12 mil UY glove offers greater comfort and dexterity. Safety is significantly increased with contrasting colors - white Hypalon™ over the blue polyurethane. This allows the operator or inspector to detect punctures, hits, abrasions and nicks with relative ease.

The polyurethane layer is 50% of the overall thickness and provides the highest level protection against tear and puncture.

The hypalon™ layer is 50% of the overall thickness and provides very good resistance to ozone ageing, plus chemical resistance against acid and alkali products such as nitric acid.

PACKAGING

Each glove has an individual polypropylene insert to prevent the glove from folding or collapsing while in the box. All gloves should be stored and shipped with inserts to provide assurance the gloves are held in an extended form.

Each glove pair is packaged in a protective black pouch to protect the gloves from U/V rays and ageing. They are then placed into boxes to prevent the gloves from being damaged during shipping.

STORAGE ADVICE

The gloves must be stored in their original packaging, at room temperature (between 40°F and 80°F or 4°C and 27°C).

The gloves when removed from their original packaging must be protected against all potential risks.

Recommended shelf life of the UY glove, when stored in its original packing and in the above conditions: 3 years.

MAINTENANCE ADVICE

If necessary, gloves can be washed with soapy water, rinsed under tap water, dried in low temperature (104 °F or 40 °C maximum) current of air, until completely dry then dusted with talcum powder.

DISPOSAL CONSIDERATIONS

Product which has not been in contact with hazardous materials can be disposed of as nonhazardous waste. Disposal must be in accordance with applicable Federal and Local regulations.

Submit a quotation request online:

For More Information, Please Call (978) 462-4415 Whatever your specific isolator glove, glove port, and o-rings & cuff needs may be, look to Innovative Technology to fulfill them!